This should be a simple task, since they’re usually just screwed into the body, though you may need to remove a couple nuts to unsecure them. Your last step in disassembling a pool table is to remove the legs. Bag up the screws so you can find them later. If you do find that to be the case, scrape off the beeswax with your flathead screwdriver before removing them.Īfter all the screws are out, lift the slate bed off the main body of the pool table and set aside. Note that some manufacturers cover these screws in a beeswax coating, which can make them a bit tricky to spot and remove. Generally, you’ll find one screw in each corner of the slate, though there may be additional screws running down its center. Using your drill fitted with a screwdriver bit, take out each screw holding it in place. Of course, before you lift the slate you need to remove the screws. This step is when it’s extra important to have a helper, since the slate bed on your pool table can weigh as much as 450 pounds if it’s all in one piece, or be composed of separate pieces weighing anywhere from 150 to 200 pounds each. Once the felt is removed, fold it as neatly as possible and set aside. If the felt is stapled on - Use your flathead screwdriver or needle nose pliers to remove the staples holding the felt in place.
Use extra care when pulling the felt up around the pockets. If the felt is glued on - Start at one corner and very gently start pulling the felt off of the slate in a slow, backward motion. Work slowly as you remove it to make sure nothing tears, unless your felt is worn out and you intend on replacing it after your move anyway. The felt surface of a pool table is secured to the slate bed in one of two ways: glue or staples. One of the more time intensive steps of disassembling a pool table is removing the felt, but you’ll have to do it in order to get to the slate bed underneath (which, depending on your pool table’s set up, may need to be taken apart into separate pieces-you won’t know until you take off the felt). Then bag the screws so you will be able to locate them easily later on when you go to reassemble the pool table, and set the side rails aside somewhere safe. Be careful as you unscrew the last of the bolts so that you can gently remove the side rail or rails from the table. Depending on how your pool table is set up, your side rail may be in one piece or multiple pieces. Take your wrench and remove the bolts that are keeping it in place. Your next step is going to be to remove the side rails. This is when your eye protections is really important, since these staples can easily fall once you dislodge them.Īfter all of the staples are removed and the pockets are off, stick the pockets in a packing box and set aside. Lying on your back, use your flathead screwdriver or a pair of needle nose pliers to carefully remove the staples that are used to hold the drop pockets in place.
It’s actually not that hard to dissemble a pool table if you go into it knowing what to expect. To make sure that you are properly protected, wear eye protection during the disassembly and reassembly process and have a helper on hand to assist with any heavy lifting. Safety is important when taking apart any piece of furniture, and that goes double for something with as many heavy parts as a pool table. Important Safety Tips Before You Disassemble and Reassemble a Pool Table If you’re trying to disassemble and reassemble a pool table of a different variety, you’ll need to find a guide for that specific type. Note: Keep in mind that these directions apply to a standard, wood-framed pool table with drop pockets and a slate bed. So how do you do it? In this post, we’ll cover all of the general advice you need to know in order to disassemble and reassemble a pool table so that you’ll be ready to go on moving day.
#Legacy billiards pool table assembly professional
Standard pool tables are incredibly large and heavy, making it pretty difficult to move them in one piece-even for a professional moving company. Don't forget to add the 2 in 1 Game Table Top (NOT INCLUDED) - one side features a durable plastic dining top, the other a cloth covered game surface.Moving with a pool table? There’s a good chance that you’re going to need to take it apart and put it back together. The table includes everything you need to start playing including 2 cue, pool balls and chalk. Features include a ultra-fast play play surface with billiard table cloth, metal bumpers and ball return system. The Ella brings you the classic game of bumper pool in a stylish, modern style. This Elegant Ella bumper pool table will bring a relaxed and inviting style to your home.
0 kommentar(er)
